Basic Info.
Main Raw Material
Acrylic
Transport Package
Box / Carton / Pallet
Product Description
Product Description
It is an aerosol type thermoplastic acrylic self-drying paint, which is a spray paint specially designed for road markings. Inverted spray, can be sprayed by hand and machine, with uniform film formation, bright colors, fast drying, flat non-reflective, convenient construction, ultraviolet radiation resistance, mechanical friction resistance, high mechanical strength, non-stick tires,water resistance, alkali resistance, etc. Performance.
APPLICATION of products | Before use, please clean the dust,oil stain and other things in the construction site, and keep the construction site dry without water and fog; |
Before use, shake the can evenly for 2 minutes until the contents are fully mixed before use, |
The spray point of the spray head is about 15-25cm away from the surface of the sprayed object, and the moving speed is about 25-35cm/sec. Invert and spray at a uniform speed; |
If more than one spraying is required, the spraying interval should be 5-10 minutes |
This product can be used in cement, metal, glass, ceramics, clay brick marble, wood, other materials please use carefully. Small area trial shall be carried out before construction, and construction can be carried out only after there is no adverse reaction. |
Only the original nozzle can be used for inverted spraying. After inversion it can be used at an angle of 45°. It is not allowed to stand upright or parallel with the work piece to be constructed. It is not allowed to replace it with a common spray nozzle to spray according to the traditional self spray paint. |
Scroll to the bottom of the page, PM me for more information and grasp business opportunity!
buy road marking paint,marking paint,hot melt marking paint
Recommend Products--click it
It is a water-based formula that integrates penetration, cleaning, retreading, and protection of tires at one time. It is rich in cleaning foam and can effectively remove grease and dirt on tires, and can effectively prevent tires from aging and cracking. It is suitable for car tires, bumpers, rubber edges, etc. After use, it can restore the black luster of car tires and restore it as new. It is suitable for cleaning, refurbishing and protecting the tires of various automobiles, motorcycles, electric vehicles, and bicycles.1.multi- purpose foamy cleaner is specially formulated with biological surfactants and other material to produce rich foam.
2. It can permeate quickly into smudges to clear away dirt and grease, and restore a fresh look.
3.Perfect for cleaning any washable or painted surface
4.The product is mainly made of natural surface active agent with fast penetration and cleaning property and powerful dirt
removing performance.
It is suitable for Automotive, velvet, fiber, cushion, carpet, dashboard, artificial leather, electroplating product ,windshield, etc. Home furnishing: Electrical enclosure, bathroom, kitchen, furniture, plywood, wall paper, floor, fan, glass, mirror, ceramics, paint with wood and metal.This product adopted nano titanium dioxide photocatalytic materials, use of energy efficient decomposition of indoor formaldehyde, can effectively degrade toxic or harmful gases in the air, kill several kinds of bacteria, fight corrupt deodorant, purify the air. At the same time, the selection of natural plant essential oil, can eliminate peculiar smell, pure and fresh happy person, return to natural air, is a household, office, hotel, public health must-have in the entertainment places.Good heat resistance, up to 650°C anticorrosive properties, long service life, self-curing at room temperature, ageing resistance, radiation resistance, good water resistance, salt spray resistance, resistance to organic solvents, its application of nano-technology, strong bonding between the coating and the substrate, high hardness of the coating, anti-scratch, impact resistance It is made of acrylic resin and imported sun resistant pigment. It has high solid content,good covering power,fast drying and good weather resistance. It is more convenient to paint with special female valve and special nozzle. It can easily draw various colors and lines. It's suitable for all kinds of metal,ceramics, stone,wood,glass and other materials graffiti painting. If it needs to be used forplastic materials, it can be used n a small area first, and then in a large area after no adverse reactions. This product is from the aromatic compounds with high solubility solvent liquid is made with a good ability to dissolve paint,paint stripping fast,can remove a wide range of types of coatings,and paint stripping easily after clean and without prejudice to re-paint.Applies in particular to self-dry alkyd,amino paint as well as some low-temperature curing two-component epoxy and the removal of paint film.
Click on the product images above to see more details about the product you are interested in.
Exhibition
Why choose us
Theaoson is a listed company founded in 2010. We are one of the largest aerosol manufacturer in China and we are listed company. We dedicated to research, development, production and sales to aerosol in car care, beauty care, household, industries and disinfection.
OEM Process
FAQ
CONTACT
Name: Katherine Cai
Made-In-China: You can contact me directly online via the session box below, or you can contact me via the Contact Supplier on the right.
Social Media: Search Katherine Cai in Twitter, Youtube, Facebook, Linkedin
Hope to meet you there
Address:
No. 1, North National Highway, Fine Chemical Science Park, Nanxiong City, Guangdong Province, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Construction & Decoration, Health & Medicine, Security & Protection, Tools & Hardware
Company Introduction:
Theaoson is a listed company founded in 2010. We are one of the largest aerosol manufacturer in China and we are listed company. We dedicated to research, development, production and sales to aerosol in car care, beauty care, household, industries and disinfection.
Please allow me to have a brief introduction to the advantages of our aerosol products:
1. The factory environment is as beautiful and modern as gardens.
2. Area: 120, 000 square meters. Located in Fine Chemical Science Park which is according to Chinese government′s requirement for the chemical production base.
3. We mainly focus on aerosol in car care, beauty care, household, disinfection and industrial aspects.
4. Yearly output: 300 million cans. Lead time for new orders is 20-25 days, for repeated orders is 18-20 days.
5. Equipped with 25 world-leading production lines and professional testing instruments imported from Germany.
6. Adopt the advanced 6S lean management and the "five practice" of corporate culture and management philosophy.
7. Team: R& D, QC and production teams are 24 years of industry experience.
8. Certificates: "Top 100 Enterprises in Guangdong Province" "AEO Advanced Certificate" "Production License for Dangerous Chemical Products", "Sanitation License for Disinfection Products", "Guangdong Pollutant Discharge Permit", FDA, CE, SGS, ISO9001, ISO14001, RoHS, etc.
9. Website: Theaoson. En. Made-in-China. com